Raman Measurements of Thermal Transport in Suspended Monolayer Graphene of Variable Sizes in Vacuum and Gaseous Environments

ORAL

Abstract

Using micro-Raman spectroscopy, the thermal conductivity of a graphene monolayer grown by chemical vapor deposition and suspended over holes with different diameters ranging from 2.9 to 9.7 $\mu $m was measured in vacuum, thereby eliminating errors caused by heat loss to the surrounding gas. The obtained thermal conductivity values of the suspended graphene range from (2.6$\pm $0.9) to (3.1$\pm $1.0)$\times $10$^{3}$Wm$^{-1}$K$^{-1}$ near 350 K without showing the sample size dependence predicted for suspended, clean, and flat graphene crystal. The lack of sample size dependence is attributed to the relatively large measurement uncertainty as well as grain boundaries, wrinkles, defects, or polymeric residue that are possibly present in the measured samples. Moreover, from Raman measurements performed in air and CO$_{2}$ gas environments near atmospheric pressure, the heat transfer coefficient for air and CO$_{2}$ was determined and found to be (2.9+5.1/-2.9) and (1.5+4.2/-1.5)$\times $10$^{4}$Wm$^{-2}$K$^{-1}$, respectively, when the graphene temperature was heated by the Raman laser to about 510 K.

Authors

  • Shanshan Chen

    University of Texas at Austin

  • Arden Moore

    University of Texas at Austin

  • Weiwei Cai

    University of Texas at Austin

  • Ji Won Suk

    University of Texas at Austin

  • Jinho An

    University of Texas at Austin

  • Columbia Mishra

    University of Texas at Austin

  • Charles Amos

    University of Texas at Austin

  • Carl Magnuson

    University of Texas at Austin

  • Junyong Kang

    Xiamen Universiy, Xiamen, China

  • Li Shi

    The University of Texas at Austin, Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX 78712, USA, University of Texas at Austin

  • Rodney Ruoff

    The University of Texas at Austin, The University of Texas at Austin, Dept. of Mechanical Engineering and the Materials Science and Engineering Program, University of Texas at Austin