Physics Concepts in Polymer Engineering

Presentations

• Polymer crystallization at high melt-supercooling

  ORAL · Invited

  March 4, 2024, 4:00 PM – March 4, 2024, 4:36 PM

  Presenters

  • René Androsch

    Martin Luther University

  Authors

  • René Androsch

    Martin Luther University

  View abstract →

• Semicrystalline polyethylene as a network in the gelation regime

  ORAL

  March 4, 2024, 4:36 PM – March 4, 2024, 4:48 PM

  Publication: A. W. Bosse, J. Furmanski, Semicrystalline polyethylene as a network in the gelation regime, to be submitted.

  Presenters

  • August W Bosse

    Exxon Mobil Corporation

  Authors

  • August W Bosse

    Exxon Mobil Corporation

  • Jevan Furmanski

    University of Dayton Research Institute

  View abstract →

• Porous Melt Blown PBT Fibers with High Ductility and High Temperature Structure Stability

  ORAL

  March 4, 2024, 4:48 PM – March 4, 2024, 5:00 PM

  Presenters

  • Josh W Goetze

    University of Minnesota

  Authors

  • Josh W Goetze

    University of Minnesota

  • Cesar Benitez

    University of Texas Rio Grande Valley

  • Frank S Bates

    University of Minnesota

  • Christopher J Ellison

    University of Minnesota

  View abstract →

• Processing-dependent microstructure and gas permeability of polyethylene blends for improved oxygen barrier

  ORAL

  March 4, 2024, 5:00 PM – March 4, 2024, 5:12 PM

  Publication: Polyethylene blends for improved oxygen barrier: Processing-dependent microstructure and gas permeability. Submitted to ACS Applied Polymer Materials.

  Presenters

  • Kyungtae Kim

    Los Alamos National Laboratory

  Authors

  • Kyungtae Kim

    Los Alamos National Laboratory

  • Aristotle J Zervoudakis

    University of Minnesota

  • Jacob A LaNasa

    Los Alamos National Laboratory

  • Greg Haugstad

    University of Minnesota

  • Fang Zhou

    University of Minnesota

  • Bongjoon Lee

    University of Minnesota

  • Olivier Lhost

    TotalEnergies OneTech Belgium

  • Yves Trolez

    TotalEnergies OneTech Belgium

  • Frank S Bates

    University of Minnesota

  • Chris W Macosko

    University of Minnesota

  View abstract →

• Establishing structure-processing-property relationships in 3D printed thermoplastic : pi-conjugated blends

  ORAL

  March 4, 2024, 5:12 PM – March 4, 2024, 5:24 PM

  Publication: Planned paper:
  Jiayi Chen, Nahel Blanc, Audrey Laventure. Hot-melt extrusion of thermoplastic : pi-conjugated polymer blends

  Presenters

  • Audrey Laventure

    Universite de Montreal

  Authors

  • Audrey Laventure

    Universite de Montreal

  • Jiayi Chen

    Universite de Montreal

  • Nahel Blanc

    Universite de Montreal

  View abstract →

• The Role of Shear and Extensional Flows in 3DP-Induced Alignment of Block Copolymer Nanostructures

  ORAL

  March 4, 2024, 5:24 PM – March 4, 2024, 5:36 PM

  Publication: Directed self-assembly of thermoplastic elastomers via 3D printing to achieve mechanically tailored soft architectures (in prep.)

  Presenters

  • Alice S Fergerson

    Princeton University

  Authors

  • Alice S Fergerson

    Princeton University

  • Shawn M Maguire

    Princeton University

  • Emily C Davidson

    Princeton University, Princeton

  View abstract →

• Residual orientation mapping in material extrusion processes

  ORAL

  March 4, 2024, 5:36 PM – March 4, 2024, 5:48 PM

  Presenters

  • Anthony P Kotula

    National Institute of Standards and Tech

  Authors

  • Anthony P Kotula

    National Institute of Standards and Tech

  • Jonathan Seppala

    National Institute of Standards and Technology

  • Benjamin E Dolata

    Georgetown University

  • Yoontae Kim

    Georgetown University

  View abstract →

• Evaluation of Fiber Orientation Measurement Techniques and Anisotropic Tensile Analysis of Additively Manufactured Carbon Fiber Poly-Lactic Acid

  ORAL

  March 4, 2024, 5:48 PM – March 4, 2024, 6:00 PM

  Publication: Planned publication to be submitted to MDPI Materials

  Presenters

  • Lucinda K Slattery

    U.S. Army Corps of Engineers Engineer Research and Development Center (ERDC)

  Authors

  • Lucinda K Slattery

    U.S. Army Corps of Engineers Engineer Research and Development Center (ERDC)

  • Zackery B McClelland

    U.S. Army Corps of Engineers Engineer Research and Development Center (ERDC)

  • Samuel T Hess

    University of Maine

  View abstract →

• Understanding Nonlinear Fluid Dynamics for All-aqueous Printing of a Viscoelastic Droplet in Yield-Stress Fluids

  ORAL

  March 4, 2024, 6:00 PM – March 4, 2024, 6:12 PM

  Presenters

  • Xiaoxiao Ma

    University of Virginia

  Authors

  • Xiaoxiao Ma

    University of Virginia

  • Jinchang Zhu

    University of Virginia

  • Liheng Cai

    University of Virginia

  View abstract →

• Modeling Electrosprayed Particle Assembly on Geometrically Controlled Sessile Droplet Surfaces through Brownian Dynamics Simulations

  ORAL

  March 4, 2024, 6:12 PM – March 4, 2024, 6:24 PM

  Presenters

  • Nasir Amiri

    Binghamton University

  Authors

  • Nasir Amiri

    Binghamton University

  • Joseph M Prisaznuk

    Binghamton University

  • Peter Huang

    Binghamton University

  • Paul R Chiarot

    SUNY Binghamton University, Binghamton University

  • Xin Yong

    Binghamton University

  View abstract →

• Modelling the interplay between printing conditions, rheology, and crystallization in MatEx additive manufacturing

  ORAL

  March 4, 2024, 6:24 PM – March 4, 2024, 6:36 PM

  Publication:
  
  Pu, J., McIlroy, C., Jones, A. and Ashcroft, I., 2021. Understanding mechanical properties in fused filament fabrication of polyether ether ketone. Additive Manufacturing, 37, p.101673.
  Costanzo, A., Spotorno, R., Candal, M.V., Fernández, M.M., Müller, A.J., Graham, R.S., Cavallo, D. and McIlroy, C., 2020. Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36, p.101415.
  Costanzo, A., Poggi, A., Looijmans, S., Venkatraman, D., Sawyer, D., Puskar, L., Mcllroy, C. and Cavallo, D., 2022. The role of molar mass in achieving isotropy and inter-layer strength in Mat-Ex printed polylactic acid. Polymers, 14(14), p.2792.
  Costanzo, A., Cavallo, D. and McIlroy, C., 2022. High-performance co-polyesters for material-extrusion 3D printing: A molecular perspective of weld properties. Additive Manufacturing, 49, p.102474.
  Das, A., Riet, J.A., Bortner, M.J. and McIlroy, C., 2022. Rheology, crystallization, and process conditions: The effect on interlayer properties in three-dimensional printing. Physics of Fluids, 34(12).

  Presenters

  • Claire McIlroy

    University of Lincoln

  Authors

  • Claire McIlroy

    University of Lincoln

  View abstract →

• Abstract Withdrawn

  ORAL Withdrawn

  March 4, 2024, 6:36 PM – March 4, 2024, 6:48 PM

  View abstract →

• Effects of Cooperative Association on Polymer Conformational Transition in Solutions

  ORAL

  March 4, 2024, 6:48 PM – March 4, 2024, 7:00 PM

  Publication: Effects of Cooperative Association on Polymer Conformational Transition in Solutions (Manuscript under Preparation)

  Presenters

  • Xiangyu Zhang

    Johns Hopkins University

  Authors

  • Xiangyu Zhang

    Johns Hopkins University

  • Dong Meng

    Mississippi State University

  View abstract →