Nano Motor Construction

ORAL

Abstract

Ten micron-sized polystyrene spheres were applied to a quartz substrate with a dodycal solution to make a monolayer of microspheres. The microspheres are found to self-assemble as a monolayer on the surface. A platinum thin layer was deposited onto the surface with a Hummer IV sputter coater and then placed into a diluted chloroform solution. The chloroform removed the microspheres from the surface, which gave a honeycomb structure on the surface of the quartz substrate. Using a liftoff process the honeycomb structure was lifted from the substrate. The honeycomb structure was then broken to get a single ring. The single ring was placed in a liquid solution with a low viscosity so that the ring will not encounter much resistance while moving. An alternating magnetic field generated by applying an AC current to two Helmholtz coils was applied to the ring to create an induced current inside the ring. A permanent magnetic field was applied in the perpendicular direction to the formal field to make the ring to rotate by generating a magnetic torque. To ensure the ring was spinning a laser beam was focusing on the ring, and a change in the reflected pattern.

–

Authors

  • Craig Shaffer

  • Shawn Pickering

  • Dongdong Jia

    Department of Geology and Physics, Lock Haven University of Pennsylvania, Department of Geology and Physics, Lock Haven Univeristy of Pennsylvania

  • Hyeonjae Kim

    NASA Johnson Space Center, Ursinus College, Purdue University Calumet, University of Notre Dame, GSI, Germany, Florida State University, Ohio Wesleyan University, Department of Physics, The University of Akron, Physics Department, Cleveland State University, Wright State University, Cornell University, Johannes Gutenberg Universit{\"a}t Mainz, Brookhaven National Laboratory, Miami University, Case Western Reserve University, Harvey Mudd College, Univ. Akron, Dept. of Geology and Physics, Lock Haven University of Pennsylvania, The University of Akron